Concrete Flooring and Deck Repair and Coating Products

CONCRETE RESTORATION AND COATING PRODUCTS

RL-Series Restoration Latexes RL-1, RL-2, RL-3, RL-4, RL-5, RL-6, RL-7
RL-Series latex-modifiers are unique, reactive acrylic additives designed to enhance the performance of Portland cement-based materials. When added to cement-based mortars, patches, plasters and coatings, RL-Series latex modifiers improve mechanical performance, workability, adhesion and resistance to freeze-thaw and harsh environmental exposures.

System 44 Concrete Repair Mortars
Edison SYSTEM 44-Series patching compounds are one-component, cement-based mortars designed for effective and economical repairs to all types of concrete structures. The series includes a wide range of formulations, each engineered for maximum performance and workability under a particular set of service and application conditions.

Custom SYSTEM 45 Custom-Matched Repair & Coating Compounds
Edison Custom SYSTEM 45 products are two-component, latex-modified, cementitious compounds used to produce highly durable and compatible aesthetic repairs to stucco, stone, masonry and concrete.

DECK-TOP 47, 47-RC Thin Resurfacers for Concrete Floors and Decks (Regular & Rapid-Cure Formulas)
DECK-TOP 47 and 47-RC are two-part, latex modified, concrete patching and resurfacing compounds designed for high-performance in thin-section topping applications. DECK-TOP applications of 1/8" to ¼" thickness withstand heavy vehicular traffic, impact and vibration without loss of adhesion or rapid wear.

SYSTEM 49 CPBA Corrosion Resistant Primer and Bonding Agent for Embedded Reinforcing Steel
SYSTEM 49-CPBA is a two-component, latex-cement primer and bonding agent designed to protect steel reinforcement from corrosion while promoting adhesion between patching compounds and concrete and steel substrates. It is an odorless, non-flammable, waterborne system which is essentially non-hazardous in storage and handling.

LEVEL-X52, Self-Leveling, Self-Smoothing Polymer Modified Floor Topping
LEVEL-X 52 is a one part, cement-based, polymer modified floor topping and leveling compound designed to provide smooth and level interior or exterior floors and decks with a minimum of time and labor. LEVEL-X 52 can be used to prepare a wide variety of sub-floors for installation of tile, carpet, resilient flooring, wood flooring and many types of surface coatings. It may also be left exposed as a final finish in light industrial or commercial environments. LEVEL-X 52 also provides rapid, economical casting, repair and leveling in exterior exposures and in wet environments. It readily accepts a variety of finishes, or may be left exposed to traffic and weather

SYSTEM 90-II, 90-W Catalytic Breathing Sealers & Stains
Edison SYSTEM 90-Series sealers are reactive treatments designed for maximum performance and exterior durability in protection of on-grade and above-grade stone, concrete and masonry. Surfaces treated with SYSTEM 90 products are sealed against a wide range of chemical and weather exposures, including acid rain, melting snow, freeze-thaw, de-icing salts, air pollutants, wind driven rain and a variety of other materials.Pigmented treatments combine all the performance of 90-Series sealers with the aesthetic benefits of a durable semi-transparent stain.

AQUATHANE UA-210 Types E, F, NCL and H-A/G Waterborne Polyurethane Coatings
EDISON AQUATHANE UA-210 products are multi-purpose, high-performance, waterborne polyurethane- based coatings which can be applied to natural stone. They are breathing, low in odor, VOC-Compliant, fast drying, reactive, single component products. Cured films are tough, flexible, and resistant to abrasion and intermittent exposure to water and many chemicals.

AQUEPOXY 250 Waterborne Immersion-Grade Epoxy
High-gloss, chemical and water-resistant waterborne epoxy coating for floors, walls, machinery surfaces. Suitable for continuous water immersion after cure, may be applied to damp or "green" concrete

FLEXI-DECK 500-E Modified Epoxy Flex-Coat
Low viscosity, odorless, 100% solids, self-priming flexible epoxy coating. Used as elastomeric primer for rigid epoxies, as flexible hardcoat over 500-U membranes, or for mechanical room and industrial floor membranes.

FLEXI-DECK 500-L Oil-Tolerant 100% Solids Primer
Low viscosity, flexible, odorless primer, bonds to ceramic and vinyl tile, wood, smooth concrete, oil-contaminated concrete and metal, many previous epoxy coatings.

FLEXI-GARD 500-N Novolac Epoxy Coatings
FLEXI-GARD 500-N-FLX Flexibilized Novolac Epoxy
FLEXI-GARD 500-N is a 100% solids, odorless, VOC-Compliant epoxy coating system designed for maximum resistance to chemical spillage and immersion, heavy industrial traffic and elevated temperatures.

FLEXI-GARD 500-S Low Viscosity Epoxy Coatings
100% solids, odorless, USDA-accepted clear or colored floor coatings Also available in 90% solids (500S-90) for easy handling and low cost. Withstands a wide range of chemical exposures.

FLEXI-DECK 500-U Urethane-Epoxy Elastomeric Deck Coating
High elongation permits use as waterproof, crack bridging surface for floors and decks, interior or exterior. Low temperature, fast-curing grade 500-ULT. Permanent flexibility, even at sub-zero (F) temperatures

FLEXI-SEAL 510, 510-U Flexible Epoxy Crack Fillers
FLEXI-SEAL 510 & 510-U are two-component, highly flexible 100% solids epoxies. They are designed to fill, bridge and seal small "working" cracks in stone, concrete, and masonry. They are particularly useful for sealing and waterproofing cracks up to 1/8" wide such as settling cracks, flexural (negative moment) cracks and construction joints.

FLEXI-WELD 520, 520T Epoxy Adhesives
FLEXI-WELD 520 and 520-T are two-component, moisture insensitive, high strength 100% solids epoxy adhesives for general purpose bonding to a wide variety of substrates, including stone, masonry and dry or damp concrete.

FLEXI-FILL 530 Epoxy Filler
FLEXI-FILL 530 is a unique two-component, slightly flexibilized 100% solids epoxy-acrylate-isocyanate terpolymer adhesive for surface-sealing cracks and filling small depressions in a wide variety of substrates. Suitable substrates include terra cotta, concrete, masonry and stone. FLEXI-FILL 530 is a paste adhesive, which should be used neat or mixed with coarse fillers and tooled onto bonding surfaces. Although it is packaged in premeasured "A" (Resin) and "B" (Hardener) components, the mix ratio is far less critical than for traditional 2-part epoxy formulations. This allows the user to adjust working consistency at different temperatures. This variable ratio feature makes FLEXI-FILL 530 a true "all season" epoxy adhesive and sealant.

FLEXI-BOND 540 Epoxy Bonding Agent (New Concrete to Old Concrete)
FLEXI-BOND 540 is a two component, 100% solids, moisture-insensitive epoxy bonding agent. Application of FLEXI-BOND 540 to wet or dry, properly prepared substrates assures tenacious adhesion of new toppings, patching compounds and tile bedding mortars when used in accordance with instructions. It may also be applied to steel, tile, wood and fiberglass. It can be used as a combination waterproof barrier and bonding agent when applying new concrete toppings over old concrete. It can be used to improve adhesion of tile bedding mortars to existing concrete, or may be used directly for tile bedding in combination with very fine sand. It can be used to prime and waterproof steel reinforcement prior t application of patching compounds or concrete pouring while improving adhesion of these materials. It can be used to penetrate and consolidate low strength floors , such as asbestos-cement or cinder concrete, and to improve adhesion of new toppings or patching compounds to same. It can be used to promote adhesion of concrete, bedding mortars or toppings to non-cementitious substrate, such as tile, plywood decking, or steel plate.

FLEXI- TOP 550 Overlayment and Resurfacing Mortar
FLEXI-TOP 555 Repair Mortar
FLEXI-TOP 500 & 555 are heavy-duty, 100% solids, odorless epoxy mortars far patching and topping of commercial, institutional and industrial floors.
FLEXI-TOP 550 is a self-leveling surfacing system providing heavy-duty protection at l/8" to 1/4" thickness or more. Blended with select aggregates, it forms a fluid mixture which easily spreads with a V-notched trowel or squeegee. Upon curing, it forms a dense, non-porous flooring that resists chemical and water penetration, dirt pick-up, and heavy traffic. It may be sealed with a number of protective topcoats for improved skid resistance, gloss and color retention.
FLEXI-TOP 555 is a versatile trowel-applied mortar used for patching or toppings of 1/4" or more. Blended with specially graded aggregates, it forms a dry, trowelable mortar that can be applied by hand or power trowel. This mortar is then grouted and sealed with 100% solids resins to eliminate porosity and produce a dense, non-porous, slip-resistant finish.

FLASHEPOXY 580-Series Ultra-Fast & Low Temperature Adhesives / Acrylate-Epoxies are 100% solids, low odor/toxicity, mercaptan-free formulation permits coating and patching down to -220F, for winter, refrigerator, freezer and fast-cure applications. Moisture tolerant, non-flammable, "0" VOC, non-shrink

Back To Top



Edison Coatings, Inc. Products are manufactured in the USA from US and foreign components. E-NHL 2, E-NHL 3.5 White and E-NHL 5.0 are Products of France. E-NHL 3.5 Buff and Ruregold are Products of Italy. Marfil is a Product of Spain.

3 Northwest Drive, Plainville, CT 06062 USA

Phone: (860) 747-2220 or (800) 341-6621

FAX: (860) 747-2280 or (866) 658-1189

E-Mail: Contact Us


	EDISON COATINGS PRODUCTS ARE FOR COMMERCIAL & INDUSTRIAL USE ONLY

		Last Updated: Wednesday, March 26, 2025


	Society for the Preservation of Historic Cements, Inc.

LIMITS OF LIABILITY

Edison Coatings, Inc. makes no warranties, express or implied, as to the accuracy or completeness of any of the information contained herein. This publication is offered on a complimentary basis as a service to potential customers or specifiers. While every effort has been made to include complete and accurate information, based on data and information believed to be reliable, it is the sole responsibility of the user to determine its suitability for his own intended use and purposes. Nothing contained herein shall be construed as a warranty or guarantee of any product, process or any other recommendation stated herein. Edison Coatings, Inc. assumes no responsibility for advice given, results obtained, or for any damages whether incidental or consequential, which may be incurred as a direct or indirect result of the use of this information. By proceeding to use this information, user acknowledges and agrees that he is doing so at his own risk, and user indemnifies and holds Edison Coatings harmless against any liabilities, costs or expenses resulting therefrom. All product sales are further governed by the Edison Coatings, Inc. CONDITIONS OF SALE. Privacy Policy.